ClockShark is a full field-service time clock with scheduling, geofencing and native apps. FieldTimesheet does less on purpose: clean hours from your crew, a line about what got done, and invoices your customers don't fight. Month to month, no contract.
ClockShark is a well-known time clock for construction and field service crews. Its pricing page lists GPS tracking, drag and drop scheduling, geofencing, task checklists and native iOS and Android apps, with time off and mileage tracking on the Pro plan. If you dispatch crews from a schedule every morning, that is a real set of tools.
The question for an electrical shop billing T&M is narrower. When the customer asks what three electricians did for two days, can you hand them a record they can follow? Hours alone do not answer that. Hours with a line about the work do: Thu 7:02a to 3:48p, pulled and terminated circuits 12 to 18, second-floor east wing.
FieldTimesheet is built around that line. At clock-out the electrician writes one sentence about the work, and that note goes onto a customer billing packet with the date, who worked, hours, your bill rate and the amount. What you pay your electricians never appears on it.
Below is a straight comparison using ClockShark's own pricing and integrations pages, checked October 12, 2026. Where ClockShark does more, the table says so.
| Feature | FieldTimesheet | ClockShark |
|---|---|---|
| Contract Term | Month to month or annual. Cancel anytime. | ClockShark's pricing page states a three-year contract term applies to all pricing plans. |
| Crew Work Notes | Clock-out asks what got done. Recent notes can be reused when a job carries over. | Job and task tracking with task checklists. Notes and documents can be attached to scheduled jobs. |
| Customer Billing Packet | Printable packet per job: date, who, what was done, hours, bill rate, amount. Cost rates never appear. | Timesheets and labor cost reports for the office. No customer-facing billing packet listed on the pricing page. |
| QuickBooks Online | Connect QuickBooks Online and click Sync to send completed entries as time activities. One way, from FieldTimesheet to QuickBooks. | Integrations with QuickBooks and QuickBooks Online for payroll, plus ADP and other payroll platforms. |
| Scheduling | Not included. | Drag and drop scheduling and draft schedules on every plan. |
| GPS | GPS recorded with the clock-in and clock-out punches only. No all-day tracking and no geofence. | GPS tracking on every plan. Geofencing is described on the Standard plan. |
| Mobile Clock | Clock page opens in the phone's browser on iPhone or Android. Nothing to install from an app store. | Native iOS and Android apps, plus the website. |
| No Signal | A punch tapped with no signal is saved on the phone with the time it was tapped and uploads the next time the clock page is open with signal. | Not described on the pricing page. |
| Time Off and Mileage | Not included. | PTO and mileage tracking on the Pro plan. |
| Pricing Model | Starter $39/mo for up to 3 workers. Crew $99/mo for up to 10, then $8 per extra worker. Same features on both. | Base fee plus a per-user fee. Standard $42/mo + $9.50/user, Pro $63/mo + $11.50/user. |
FieldTimesheet
Month to month or annual. Cancel anytime.ClockShark
ClockShark's pricing page states a three-year contract term applies to all pricing plans.FieldTimesheet
Clock-out asks what got done. Recent notes can be reused when a job carries over.ClockShark
Job and task tracking with task checklists. Notes and documents can be attached to scheduled jobs.FieldTimesheet
Printable packet per job: date, who, what was done, hours, bill rate, amount. Cost rates never appear.ClockShark
Timesheets and labor cost reports for the office. No customer-facing billing packet listed on the pricing page.FieldTimesheet
Connect QuickBooks Online and click Sync to send completed entries as time activities. One way, from FieldTimesheet to QuickBooks.ClockShark
Integrations with QuickBooks and QuickBooks Online for payroll, plus ADP and other payroll platforms.FieldTimesheet
Not included.ClockShark
Drag and drop scheduling and draft schedules on every plan.FieldTimesheet
GPS recorded with the clock-in and clock-out punches only. No all-day tracking and no geofence.ClockShark
GPS tracking on every plan. Geofencing is described on the Standard plan.FieldTimesheet
Clock page opens in the phone's browser on iPhone or Android. Nothing to install from an app store.ClockShark
Native iOS and Android apps, plus the website.FieldTimesheet
A punch tapped with no signal is saved on the phone with the time it was tapped and uploads the next time the clock page is open with signal.ClockShark
Not described on the pricing page.FieldTimesheet
Not included.ClockShark
PTO and mileage tracking on the Pro plan.FieldTimesheet
Starter $39/mo for up to 3 workers. Crew $99/mo for up to 10, then $8 per extra worker. Same features on both.ClockShark
Base fee plus a per-user fee. Standard $42/mo + $9.50/user, Pro $63/mo + $11.50/user.$99/mo for a 10-person crew, month to month
$137/mo for 10 users on Standard ($42 + 10 x $9.50), three-year term
ClockShark covers more ground: scheduling, geofencing, time off, mileage and native apps. If you run your day from a dispatch board, it is built for that, and FieldTimesheet is not.
FieldTimesheet is narrower. It gets the hours and a line about the work from each electrician, then turns that into a billing packet a customer can read. If your problem is T&M invoices that get questioned, that is the part that matters.
The other difference is commitment. ClockShark's pricing page states a three-year contract term on all plans. FieldTimesheet is month to month or annual, and you can cancel anytime. Run a real week on the free trial, print the billing packet for one job, and decide from that.
It is if your main job for the software is clean hours and invoice backup a customer can follow. Each clock-out carries a short note about the work, and the billing packet shows date, who worked, what was done, hours, your bill rate and the amount. It is not a replacement if you depend on ClockShark's scheduling, geofencing, PTO or mileage tracking, which FieldTimesheet does not have.
ClockShark's pricing page, checked October 12, 2026, states that a contract term of three years applies to all pricing plans. Confirm the current terms with ClockShark before you sign. FieldTimesheet has no contract: monthly or annual billing, and you can cancel anytime.
At the prices shown on ClockShark's pricing page on October 12, 2026, Standard is $42 per month plus $9.50 per user, so 10 users is $137 per month. Pro is $63 plus $11.50 per user, or $178 per month for 10 users. FieldTimesheet's Crew plan is $99 per month for up to 10 workers, and Starter is $39 per month for up to 3.
There is no import tool. You add your active jobs and invite your electricians by email, which takes a few minutes for a small shop. Each electrician opens the invite, sets a password and can clock in the same day.
FieldTimesheet connects to QuickBooks Online. You click Sync on the Time page to send completed entries as time activities. It is one way, from FieldTimesheet to QuickBooks. QuickBooks Desktop and ADP are not supported. You can also use the CSV export and printed reports without QuickBooks.
No. GPS is recorded with the clock-in and clock-out punches only. There is no all-day tracking and no geofence. The point is to document the work, not to watch the crew.